(4) Rockville RV46.3A 4x6" 3-Way Car Speakers 1000 Watts/140 Watts RMS CEA Rated
$25.45
Sale price
$25.45
Regular price
Skip to product information
<p>Price is for (2) Pairs of Rockville RV46.3A 4x6" 3-Way Car Speakers Totalling
1000 Watts Peak/140 Watts RMS!<br>
<br>
Rockville car audio speakers utilize the latest in speaker technology for
superior sound quality. We use top quality polypropylene cones which are known
for their high damping qualities. This means they can have a controlled
break-up, which results in a smoother high frequency roll-off. Our Flexmotion
Butyl Rubber Surrounds give the speakers a smooth response with minimal
distortion. For smooth and extended high frequency sounds we used high
temperature PEI dome tweeters with ferrite magnets. The RV-A series speakers are
designed with superior SPL response and extremely high power handling making
these perfect for use with the amp built into your receiver or with a high
powered external amplifier. Due to their shallow mount design, these speakers
fit in 97% of all vehicles.<br>
<br>
CEA Rated.
<br>
Rockville car audio speakers are CEA rated, what that means is that the Consumer
Electronics Association recognizes these speakers to be accurately rated and
meet their rigorous standards for wattage, SPL and frequency response. So while
other manufacturers state “out-of-this-world” wattages on their products, you
can rest assured that your Rockville speaker will work up to spec. and exceed
your expectations.<br>
<br>
What’ so special about Rockville Speakers “in engineering terms”.
<br>
The acoustic center of a driver is the point in the driver from which the sound
appears to originate. What is crucial in a good multi-element design is the
difference between the centers of the drivers. This is called relative acoustic
offset. A good speaker design features phase accuracy in and around the
crossover point, because the interaction of the drivers is most affected by the
SPL magnitude and phase in this area. The Rockville designs allow for wide
dispersion of the sound for complete musical immersion.<br>
<br>
Audio power is the electrical power transferred from an audio amplifier to a
loudspeaker, measured in watts. The electrical power delivered to the
loudspeaker and its sensitivity determines the sound power level generated with
the balance being converted to heat. Amplifiers are limited in the electrical
energy they can amplify; loudspeakers are limited in the electrical energy they
can convert to sound energy without distorting the audio signal or destroying
them selves. These power ratings are important to consumers finding compatible
products and comparing competitors. Because Rockville products are CEA rated,
you can easily and accurately match any Rockville speaker to a CEA rated
amplifier and be guaranteed of their performance match.<br>
<br>
Features:<br>
<br>
Pair Rockville RV46.3A 4 x 6" 3-way car speakers<br>
Peak Power Rating: 500 Watts per Pair / 250 Watts Each<br>
CEA Compliant RMS Rating: 70 Watts per Pair / 35 Watts Each<br>
Polypropylene woofer gives amazing bass and mids<br>
Flex Motion Butyl Rubber Surround<br>
1.2” PEI dome tweeter with ferrite magnet give amazing highs<br>
0.6” super tweeter<br>
Steel high quality basket<br>
Rubber magnet boot cover<br>
Frequency response: 60-20,000 Hz<br>
Sensitivity: 90 dB @ 1w/1m<br>
Impedance: 4 Ohm<br>
Grilles included<br>
Aluminum voice coils<br>
100% oxygen free copper voice coil windings<br>
Cotton spider material<br>
Copper terminals<br>
Cutout diameter: 5.6” x 3.46”<br>
Magnet: 5.4 Oz Y25 magnet<br>
Magnet dimensions: 70mm x 10mm<br>
Fs: 134.951 hz<br>
Re: 3.6 OHM<br>
Qes: 2.768<br>
Qts: 1.602<br>
Qms: 3.801<br>
Fits 4” x 6” openings<br>
Top mounting depth: 1.85” 95% of in
(4) Rockville RV46.3A 4x6" 3-Way Car Speakers 1000 Watts/140 Watts RMS CEA Rated
$25.45
Sale price
$25.45
Regular price